\[ \begin{align}\begin{aligned}\newcommand\blank{~\underline{\hspace{1.2cm}}~}\\% Bold symbols (vectors)
\newcommand\bs[1]{\mathbf{#1}}\\% Differential
\newcommand\dd[2][]{\mathrm{d}^{#1}{#2}} % use as \dd, \dd{x}, or \dd[2]{x}\\% Poor man's siunitx
\newcommand\unit[1]{\mathrm{#1}}
\newcommand\num[1]{#1}
\newcommand\qty[2]{#1~\unit{#2}}\\\newcommand\per{/}
\newcommand\squared{{}^2}
\newcommand\cubed{{}^3}
%
% Scale
\newcommand\milli{\unit{m}}
\newcommand\centi{\unit{c}}
\newcommand\kilo{\unit{k}}
\newcommand\mega{\unit{M}}
%
% Percent
\newcommand\percent{\unit{{\kern-4mu}\%}}
%
% Angle
\newcommand\radian{\unit{rad}}
\newcommand\degree{\unit{{\kern-4mu}^\circ}}
%
% Time
\newcommand\second{\unit{s}}
\newcommand\s{\second}
\newcommand\minute{\unit{min}}
\newcommand\hour{\unit{h}}
%
% Distance
\newcommand\meter{\unit{m}}
\newcommand\m{\meter}
\newcommand\inch{\unit{in}}
\newcommand\foot{\unit{ft}}
%
% Force
\newcommand\newton{\unit{N}}
\newcommand\kip{\unit{kip}} % kilopound in "freedom" units - edit made by Sri
%
% Mass
\newcommand\gram{\unit{g}}
\newcommand\g{\gram}
\newcommand\kilogram{\unit{kg}}
\newcommand\kg{\kilogram}
\newcommand\grain{\unit{grain}}
\newcommand\ounce{\unit{oz}}
%
% Temperature
\newcommand\kelvin{\unit{K}}
\newcommand\K{\kelvin}
\newcommand\celsius{\unit{{}^\circ C}}
\newcommand\C{\celsius}
\newcommand\fahrenheit{\unit{{}^\circ F}}
\newcommand\F{\fahrenheit}
%
% Area
\newcommand\sqft{\unit{sq\,\foot}} % square foot
%
% Volume
\newcommand\liter{\unit{L}}
\newcommand\gallon{\unit{gal}}
%
% Frequency
\newcommand\hertz{\unit{Hz}}
\newcommand\rpm{\unit{rpm}}
%
% Voltage
\newcommand\volt{\unit{V}}
\newcommand\V{\volt}
\newcommand\millivolt{\milli\volt}
\newcommand\mV{\milli\volt}
\newcommand\kilovolt{\kilo\volt}
\newcommand\kV{\kilo\volt}
%
% Current
\newcommand\ampere{\unit{A}}
\newcommand\A{\ampere}
\newcommand\milliampereA{\milli\ampere}
\newcommand\mA{\milli\ampere}
\newcommand\kiloampereA{\kilo\ampere}
\newcommand\kA{\kilo\ampere}
%
% Resistance
\newcommand\ohm{\Omega}
\newcommand\milliohm{\milli\ohm}
\newcommand\kiloohm{\kilo\ohm} % correct SI spelling
\newcommand\kilohm{\kilo\ohm} % "American" spelling used in siunitx
\newcommand\megaohm{\mega\ohm} % correct SI spelling
\newcommand\megohm{\mega\ohm} % "American" spelling used in siunitx
%
% Capacitance
\newcommand\farad{\unit{F}}
\newcommand\F{\farad}
\newcommand\microfarad{\micro\farad}
\newcommand\muF{\micro\farad}
%
% Inductance
\newcommand\henry{\unit{H}}
\newcommand\H{\henry}
\newcommand\millihenry{\milli\henry}
\newcommand\mH{\milli\henry}
%
% Power
\newcommand\watt{\unit{W}}
\newcommand\W{\watt}
\newcommand\milliwatt{\milli\watt}
\newcommand\mW{\milli\watt}
\newcommand\kilowatt{\kilo\watt}
\newcommand\kW{\kilo\watt}
%
% Energy
\newcommand\joule{\unit{J}}
\newcommand\J{\joule}
%
% Composite units
%
% Torque
\newcommand\ozin{\unit{\ounce}\,\unit{in}}
\newcommand\newtonmeter{\unit{\newton\,\meter}}
%
% Pressure
\newcommand\psf{\unit{psf}} % pounds per square foot
\newcommand\pcf{\unit{pcf}} % pounds per cubic foot
\newcommand\pascal{\unit{Pa}}
\newcommand\Pa{\pascal}
\newcommand\ksi{\unit{ksi}} % kilopound per square inch
% NOTE: do NOT define \bar -- it is the built-in LaTeX accent used by \bar{x},
% \bar{y} (sample means). Redefining it made those render as the word "bar".
\newcommand\barunit{\unit{bar}}
\end{aligned}\end{align} \]
Nov 16, 2026 | 466 words | 5 min
read
20.4. Milestone 5 - Project Presentation (Team)
At a Glance
What you will do: Present your team’s greenhouse control solution to Mission
Control: the problem, your design, the evidence that shows it works, and what you learned.
What you will submit: Your slides and your team presentation, delivered live or
recorded as your instructor directs.
Your report is the written record of the project. Your presentation delivers that work
to the client. Base every claim on evidence. A busy
audience should be able to follow it in a few minutes.
20.4.1. Presentation Outline
Plan for the time your instructor sets. Cover the five topics below in the order listed.
The problem (~1 slide). GHU-1’s failure, and how GHU-2’s design improves on GHU-1.
Your design (~2 slides). The control approach for each actuator, your flowchart, and
the one or two decisions you are most proud of. Show the result of your weighted
decision matrix instead of the whole matrix.
The evidence (~2 slides). Your acceptance-test results and the key performance plots:
temperature through the storm, CO2 through the sensor freeze. Support each claim
with the data.
The humidity recommendation (~1 slide). What the client asked for, what the hardware
allows, and what you recommend instead.
What you learned (~1 slide). One thing about the problem and one about your team’s
process.
20.4.2. Tips for a Successful Presentation
Every team member speaks. Decide who covers what in advance.
Show data in place of descriptive words. A plot with a one-line takeaway is more
convincing than a statement such as “it worked really well.”
Do not read your slides as a script. Use few words, clear figures, and text that is
readable from the back of the room.
Practice the timing. Running over time is the most common mistake, and practice
prevents it.
If your team presents in-person, be ready for questions. Mission Control might ask how
your controller decides which CO2 sensor to trust, or how you chose your gains. Know
your own numbers.
20.4.3. Submission
Your team submits two items.
Your slides, in the format your instructor specifies. For example, the file could be
named project_presentation_slides_team_#.pptx.
Your live or recorded presentation, as your instructor directs. For example, a
recording could be named project_presentation_team_#.mov.
Submit to 20.4 Milestone 5 - Project Presentation (Team) in Gradescope
before the deadline on the
Course Schedule.
Late submissions will NOT be accepted.
Learning Objectives
- PC01:
Written Communication Standards - Use professional tone, clear sentence structure, and correct spelling and grammar in all written work.
- PC03:
Captioning Visuals - Include professional captions for all figures, tables, and plots that describe what is shown and why it is relevant.
- PC04:
Visual Communication of Engineering Contexts - Create visuals that clearly communicate engineering data, models, or concepts to a technical audience and support claims or conclusions.
- SQ04:
Value Proposition - Present a clear value proposition highlighting benefits and novelty.
- EC02:
Recognize Limits, Trade-offs, and Confidence - Recognize limitations, trade-offs, and uncertainty in engineering work and communicate appropriate levels of confidence in conclusions.