\[ \begin{align}\begin{aligned}\newcommand\blank{~\underline{\hspace{1.2cm}}~}\\% Bold symbols (vectors) \newcommand\bs[1]{\mathbf{#1}}\\% Differential \newcommand\dd[2][]{\mathrm{d}^{#1}{#2}} % use as \dd, \dd{x}, or \dd[2]{x}\\% Poor man's siunitx \newcommand\unit[1]{\mathrm{#1}} \newcommand\num[1]{#1} \newcommand\qty[2]{#1~\unit{#2}}\\\newcommand\per{/} \newcommand\squared{{}^2} \newcommand\cubed{{}^3} % % Scale \newcommand\milli{\unit{m}} \newcommand\centi{\unit{c}} \newcommand\kilo{\unit{k}} \newcommand\mega{\unit{M}} % % Percent \newcommand\percent{\unit{{\kern-4mu}\%}} % % Angle \newcommand\radian{\unit{rad}} \newcommand\degree{\unit{{\kern-4mu}^\circ}} % % Time \newcommand\second{\unit{s}} \newcommand\s{\second} \newcommand\minute{\unit{min}} \newcommand\hour{\unit{h}} % % Distance \newcommand\meter{\unit{m}} \newcommand\m{\meter} \newcommand\inch{\unit{in}} \newcommand\foot{\unit{ft}} % % Force \newcommand\newton{\unit{N}} \newcommand\kip{\unit{kip}} % kilopound in "freedom" units - edit made by Sri % % Mass \newcommand\gram{\unit{g}} \newcommand\g{\gram} \newcommand\kilogram{\unit{kg}} \newcommand\kg{\kilogram} \newcommand\grain{\unit{grain}} \newcommand\ounce{\unit{oz}} % % Temperature \newcommand\kelvin{\unit{K}} \newcommand\K{\kelvin} \newcommand\celsius{\unit{{}^\circ C}} \newcommand\C{\celsius} \newcommand\fahrenheit{\unit{{}^\circ F}} \newcommand\F{\fahrenheit} % % Area \newcommand\sqft{\unit{sq\,\foot}} % square foot % % Volume \newcommand\liter{\unit{L}} \newcommand\gallon{\unit{gal}} % % Frequency \newcommand\hertz{\unit{Hz}} \newcommand\rpm{\unit{rpm}} % % Voltage \newcommand\volt{\unit{V}} \newcommand\V{\volt} \newcommand\millivolt{\milli\volt} \newcommand\mV{\milli\volt} \newcommand\kilovolt{\kilo\volt} \newcommand\kV{\kilo\volt} % % Current \newcommand\ampere{\unit{A}} \newcommand\A{\ampere} \newcommand\milliampereA{\milli\ampere} \newcommand\mA{\milli\ampere} \newcommand\kiloampereA{\kilo\ampere} \newcommand\kA{\kilo\ampere} % % Resistance \newcommand\ohm{\Omega} \newcommand\milliohm{\milli\ohm} \newcommand\kiloohm{\kilo\ohm} % correct SI spelling \newcommand\kilohm{\kilo\ohm} % "American" spelling used in siunitx \newcommand\megaohm{\mega\ohm} % correct SI spelling \newcommand\megohm{\mega\ohm} % "American" spelling used in siunitx % % Capacitance \newcommand\farad{\unit{F}} \newcommand\F{\farad} \newcommand\microfarad{\micro\farad} \newcommand\muF{\micro\farad} % % Inductance \newcommand\henry{\unit{H}} \newcommand\H{\henry} \newcommand\millihenry{\milli\henry} \newcommand\mH{\milli\henry} % % Power \newcommand\watt{\unit{W}} \newcommand\W{\watt} \newcommand\milliwatt{\milli\watt} \newcommand\mW{\milli\watt} \newcommand\kilowatt{\kilo\watt} \newcommand\kW{\kilo\watt} % % Energy \newcommand\joule{\unit{J}} \newcommand\J{\joule} % % Composite units % % Torque \newcommand\ozin{\unit{\ounce}\,\unit{in}} \newcommand\newtonmeter{\unit{\newton\,\meter}} % % Pressure \newcommand\psf{\unit{psf}} % pounds per square foot \newcommand\pcf{\unit{pcf}} % pounds per cubic foot \newcommand\pascal{\unit{Pa}} \newcommand\Pa{\pascal} \newcommand\ksi{\unit{ksi}} % kilopound per square inch % NOTE: do NOT define \bar -- it is the built-in LaTeX accent used by \bar{x}, % \bar{y} (sample means). Redefining it made those render as the word "bar". \newcommand\barunit{\unit{bar}} \end{aligned}\end{align} \]

Nov 16, 2026 | 622 words | 6 min read

12.1.2. PCA: Linear Regression Analysis#

Required Files#

Download the template ENGR131_Python_Template.py and save as 12_1_2_username.py.

Reminder

Review and reference the Python Style Guide to create a professionally formatted code file. For example, remember to provide detailed comments throughout your code so anyone can read them and understand what your program does!

Instructions#

Write a Python program that:

  1. Creates a scatter plot of the provided data

  2. Fits a linear regression model to the data

  3. Plots the linear regression model with the original data

  4. Reports the model equation and other regression statistics

Part 1#

Import the required libraries:

import numpy as np
import matplotlib.pyplot

Part 2#

Create NumPy arrays with the following values:

x: 1, 2, 3, 4, 5

y: 2.1, 3.9, 6.2, 7.8, 10.1

Part 3#

Create a scatter plot with the x and y NumPy arrays. The data markers should be black circles. The plot should display a light grey grid.

The plot title is “Sample Data” while the x- and y-axes should be labeled “X” and “Y”, respectively.

Do not submit an image of your plot to Gradescope. The autograder will examine your python code and grade the plot.

Refer to the Data Analysis and Visualization pre-class materials for for creating professional and comprehensive plots.

Part 4#

Use np.polyfit() to fit a linear regression model to the data.

Part 5#

Display the slope, intercept, and model equation (see the sample output below for formatting preferences).

Part 6#

Create another NumPy array called y_predict that holds predicted y-values for the regression model.

Part 7#

Calculate the sum of squared errors (SSE) and sum of squares total (SST) using the predicted y-values, and compute the coefficient of determination (\(r^2\)) as r_squared. Then display the r_squared value (see sample output below).

See the Linear Regression materials from our Excel unit to refresh your memory on Least Squares Regression.

Part 8#

Plot the regression line on the existing scatter plot. The model should be plotted as a solid red line, and the plot title should read “Linear Regression Fit.”

The plot legend should display the black data markers as “Sample Data” and the regression model (red line) as “Regression: [model equation], [r_squared value].” The slope, intercept, and \(r^2\) values should be formatted to three decimal places.

Do not submit an image of your plot to Gradescope. The autograder will examine your python code and grade the plot.

Sample Output#

Sample Output

$ python3 12_1_2_username.pySlope (m): 1.990Intercept (b): 0.050Model: y = 1.990x + 0.050r^2: 0.997

Gradescope Submission#

Attention

Before submitting your python file, comment all lines with plt.show() for autograding purposes.

  1. Save Deliverables: Ensure all required assignment files are saved and named exactly as specified in the assignment instructions. If a template file name contains the word template, replace only that word with your Purdue username. When a task lists more than one deliverable, such as a workbook and a report, submit each deliverable to its own matching Gradescope assignment instead of combining them into one upload.

  2. Navigate to Gradescope: Log in to Gradescope. From your Dashboard, open the assignment.

  3. Upload your work: Select the Upload submission method. Drag and drop all required files (or a compressed .zip folder) into Gradescope, and select Upload.

  4. Confirm Submission: When your upload is successful, you will see a confirmation message on your screen and receive an automated email receipt.

  5. Add Team Members (if applicable): If this is a team assignment, add all team members to the submission. Each teammate should confirm they can see the submission in their own Gradescope account. For help, visit Gradescope’s documentation on adding team members.

  6. Review Autograder Results: Wait a few minutes for the autograder to evaluate the relevant files. Scroll down to view any failed test cases. If you need assistance interpreting the output or errors, ask your teaching team.

  7. Resubmit if Necessary: You can edit your files and select Resubmit as many times as you need before the assignment deadline. Only your final, active submission is graded. (Note: If you need to resubmit, you must upload all required files for the assignment again).

For a detailed walkthrough, review the official Gradescope Submission Guide.