\[ \begin{align}\begin{aligned}\newcommand\blank{~\underline{\hspace{1.2cm}}~}\\% Bold symbols (vectors) \newcommand\bs[1]{\mathbf{#1}}\\% Differential \newcommand\dd[2][]{\mathrm{d}^{#1}{#2}} % use as \dd, \dd{x}, or \dd[2]{x}\\% Poor man's siunitx \newcommand\unit[1]{\mathrm{#1}} \newcommand\num[1]{#1} \newcommand\qty[2]{#1~\unit{#2}}\\\newcommand\per{/} \newcommand\squared{{}^2} \newcommand\cubed{{}^3} % % Scale \newcommand\milli{\unit{m}} \newcommand\centi{\unit{c}} \newcommand\kilo{\unit{k}} \newcommand\mega{\unit{M}} % % Percent \newcommand\percent{\unit{{\kern-4mu}\%}} % % Angle \newcommand\radian{\unit{rad}} \newcommand\degree{\unit{{\kern-4mu}^\circ}} % % Time \newcommand\second{\unit{s}} \newcommand\s{\second} \newcommand\minute{\unit{min}} \newcommand\hour{\unit{h}} % % Distance \newcommand\meter{\unit{m}} \newcommand\m{\meter} \newcommand\inch{\unit{in}} \newcommand\foot{\unit{ft}} % % Force \newcommand\newton{\unit{N}} \newcommand\kip{\unit{kip}} % kilopound in "freedom" units - edit made by Sri % % Mass \newcommand\gram{\unit{g}} \newcommand\g{\gram} \newcommand\kilogram{\unit{kg}} \newcommand\kg{\kilogram} \newcommand\grain{\unit{grain}} \newcommand\ounce{\unit{oz}} % % Temperature \newcommand\kelvin{\unit{K}} \newcommand\K{\kelvin} \newcommand\celsius{\unit{{}^\circ C}} \newcommand\C{\celsius} \newcommand\fahrenheit{\unit{{}^\circ F}} \newcommand\F{\fahrenheit} % % Area \newcommand\sqft{\unit{sq\,\foot}} % square foot % % Volume \newcommand\liter{\unit{L}} \newcommand\gallon{\unit{gal}} % % Frequency \newcommand\hertz{\unit{Hz}} \newcommand\rpm{\unit{rpm}} % % Voltage \newcommand\volt{\unit{V}} \newcommand\V{\volt} \newcommand\millivolt{\milli\volt} \newcommand\mV{\milli\volt} \newcommand\kilovolt{\kilo\volt} \newcommand\kV{\kilo\volt} % % Current \newcommand\ampere{\unit{A}} \newcommand\A{\ampere} \newcommand\milliampereA{\milli\ampere} \newcommand\mA{\milli\ampere} \newcommand\kiloampereA{\kilo\ampere} \newcommand\kA{\kilo\ampere} % % Resistance \newcommand\ohm{\Omega} \newcommand\milliohm{\milli\ohm} \newcommand\kiloohm{\kilo\ohm} % correct SI spelling \newcommand\kilohm{\kilo\ohm} % "American" spelling used in siunitx \newcommand\megaohm{\mega\ohm} % correct SI spelling \newcommand\megohm{\mega\ohm} % "American" spelling used in siunitx % % Capacitance \newcommand\farad{\unit{F}} \newcommand\F{\farad} \newcommand\microfarad{\micro\farad} \newcommand\muF{\micro\farad} % % Inductance \newcommand\henry{\unit{H}} \newcommand\H{\henry} \newcommand\millihenry{\milli\henry} \newcommand\mH{\milli\henry} % % Power \newcommand\watt{\unit{W}} \newcommand\W{\watt} \newcommand\milliwatt{\milli\watt} \newcommand\mW{\milli\watt} \newcommand\kilowatt{\kilo\watt} \newcommand\kW{\kilo\watt} % % Energy \newcommand\joule{\unit{J}} \newcommand\J{\joule} % % Composite units % % Torque \newcommand\ozin{\unit{\ounce}\,\unit{in}} \newcommand\newtonmeter{\unit{\newton\,\meter}} % % Pressure \newcommand\psf{\unit{psf}} % pounds per square foot \newcommand\pcf{\unit{pcf}} % pounds per cubic foot \newcommand\pascal{\unit{Pa}} \newcommand\Pa{\pascal} \newcommand\ksi{\unit{ksi}} % kilopound per square inch % NOTE: do NOT define \bar -- it is the built-in LaTeX accent used by \bar{x}, % \bar{y} (sample means). Redefining it made those render as the word "bar". \newcommand\barunit{\unit{bar}} \end{aligned}\end{align} \]

Nov 16, 2026 | 467 words | 5 min read

16.5. Milestone 1 - Problem Formulation (Individual)#

At a Glance

What you will do: Describe the GHU-2 project as a whole, then narrow it to the task in front of your team. Write both parts in your own words.

What you will submit: Your problem formulation, in two parts.

You formulate the problem independently before your team drafts the Problem Scoping section of its report. The team builds its problem statement from the formulations of all its members. Where the formulations disagree, the team must resolve the disagreement in the problem statement.

In the Client Needs Analysis you extracted the client’s stakeholders, needs, constraints, and success criteria from the brief. In this assignment you use that extraction to formulate the problem. Reread the Mission Brief if you need it.

Answer the following questions in Gradescope (see submission instructions).

16.5.1. Part A: Formulate the Problem (Big Picture)#

  1. Problem statement. In one short paragraph and in your own words, state the problem your team must solve: what has to be achieved, for whom, and how success will be judged. Write it so that a classmate who has not read the brief understands the job. Build on your Activity 1 extraction. Do not re-list the stakeholders and constraints you already recorded there.

  2. Implementation issues. Your control software will be used in the situation the brief describes. It may also be used on other crops, other greenhouse units, and other missions. Describe the issues that arise for stakeholders when your solution is used outside the exact situation you designed it for.

16.5.2. Part B: Identify the Task-Level Problem#

  1. Direct user. Of the stakeholders you identified in Activity 1, identify the direct user of what your team delivers. The direct user is the stakeholder who takes your work product and uses it. Name them in one line.

  2. The task. The mission as a whole is large, and your team’s task is a narrow part of it. In a few sentences, state precisely what your team’s software must do for the direct user. Describe the specific job the controller performs each tick and the measurable result that counts as done. Base every claim on the brief.

  3. Complexity. Describe the specific reasons this problem is complex to solve. Base each reason on the brief’s technical annex, and do not restate the problem. (Hint: look at what the hardware cannot do, and at which sensor is known for inaccuracy.)

16.5.3. Submission#

  • Complete this assignment directly in Gradescope under 16.5 Milestone 1 - Problem Formulation (Individual).

  • Submit before the deadline listed on the Course Schedule.

Learning Objectives

PS01:

Stakeholder-Based Problem Definition - Explain the problem based on synthesis of client, user, and stakeholder needs.

PS03:

Constraints and Criteria - Define key criteria and constraints that address client and user needs.

PS04:

Competing or Conflicting Needs - Identify competing or conflicting needs that influence the problem definition.

EC02:

Recognize Limits, Trade-offs, and Confidence - Recognize limitations, trade-offs, and uncertainty in engineering work and communicate appropriate levels of confidence in conclusions.