Milestone 5 - Reflection (Individual)

\[ \begin{align}\begin{aligned}\newcommand\blank{~\underline{\hspace{1.2cm}}~}\\% Bold symbols (vectors) \newcommand\bs[1]{\mathbf{#1}}\\% Differential \newcommand\dd[2][]{\mathrm{d}^{#1}{#2}} % use as \dd, \dd{x}, or \dd[2]{x}\\% Poor man's siunitx \newcommand\unit[1]{\mathrm{#1}} \newcommand\num[1]{#1} \newcommand\qty[2]{#1~\unit{#2}}\\\newcommand\per{/} \newcommand\squared{{}^2} \newcommand\cubed{{}^3} % % Scale \newcommand\milli{\unit{m}} \newcommand\centi{\unit{c}} \newcommand\kilo{\unit{k}} \newcommand\mega{\unit{M}} % % Percent \newcommand\percent{\unit{{\kern-4mu}\%}} % % Angle \newcommand\radian{\unit{rad}} \newcommand\degree{\unit{{\kern-4mu}^\circ}} % % Time \newcommand\second{\unit{s}} \newcommand\s{\second} \newcommand\minute{\unit{min}} \newcommand\hour{\unit{h}} % % Distance \newcommand\meter{\unit{m}} \newcommand\m{\meter} \newcommand\inch{\unit{in}} \newcommand\foot{\unit{ft}} % % Force \newcommand\newton{\unit{N}} \newcommand\kip{\unit{kip}} % kilopound in "freedom" units - edit made by Sri % % Mass \newcommand\gram{\unit{g}} \newcommand\g{\gram} \newcommand\kilogram{\unit{kg}} \newcommand\kg{\kilogram} \newcommand\grain{\unit{grain}} \newcommand\ounce{\unit{oz}} % % Temperature \newcommand\kelvin{\unit{K}} \newcommand\K{\kelvin} \newcommand\celsius{\unit{{}^\circ C}} \newcommand\C{\celsius} \newcommand\fahrenheit{\unit{{}^\circ F}} \newcommand\F{\fahrenheit} % % Area \newcommand\sqft{\unit{sq\,\foot}} % square foot % % Volume \newcommand\liter{\unit{L}} \newcommand\gallon{\unit{gal}} % % Frequency \newcommand\hertz{\unit{Hz}} \newcommand\rpm{\unit{rpm}} % % Voltage \newcommand\volt{\unit{V}} \newcommand\V{\volt} \newcommand\millivolt{\milli\volt} \newcommand\mV{\milli\volt} \newcommand\kilovolt{\kilo\volt} \newcommand\kV{\kilo\volt} % % Current \newcommand\ampere{\unit{A}} \newcommand\A{\ampere} \newcommand\milliampereA{\milli\ampere} \newcommand\mA{\milli\ampere} \newcommand\kiloampereA{\kilo\ampere} \newcommand\kA{\kilo\ampere} % % Resistance \newcommand\ohm{\Omega} \newcommand\milliohm{\milli\ohm} \newcommand\kiloohm{\kilo\ohm} % correct SI spelling \newcommand\kilohm{\kilo\ohm} % "American" spelling used in siunitx \newcommand\megaohm{\mega\ohm} % correct SI spelling \newcommand\megohm{\mega\ohm} % "American" spelling used in siunitx % % Capacitance \newcommand\farad{\unit{F}} \newcommand\F{\farad} \newcommand\microfarad{\micro\farad} \newcommand\muF{\micro\farad} % % Inductance \newcommand\henry{\unit{H}} \newcommand\H{\henry} \newcommand\millihenry{\milli\henry} \newcommand\mH{\milli\henry} % % Power \newcommand\watt{\unit{W}} \newcommand\W{\watt} \newcommand\milliwatt{\milli\watt} \newcommand\mW{\milli\watt} \newcommand\kilowatt{\kilo\watt} \newcommand\kW{\kilo\watt} % % Energy \newcommand\joule{\unit{J}} \newcommand\J{\joule} % % Composite units % % Torque \newcommand\ozin{\unit{\ounce}\,\unit{in}} \newcommand\newtonmeter{\unit{\newton\,\meter}} % % Pressure \newcommand\psf{\unit{psf}} % pounds per square foot \newcommand\pcf{\unit{pcf}} % pounds per cubic foot \newcommand\pascal{\unit{Pa}} \newcommand\Pa{\pascal} \newcommand\ksi{\unit{ksi}} % kilopound per square inch % NOTE: do NOT define \bar -- it is the built-in LaTeX accent used by \bar{x}, % \bar{y} (sample means). Redefining it made those render as the word "bar". \newcommand\barunit{\unit{bar}} \end{aligned}\end{align} \]

Nov 16, 2026 | 425 words | 4 min read

20.5. Milestone 5 - Reflection (Individual)#

At a Glance

What you will do: Reflect on your own engineering process: what worked, what did not, and what you would have done differently.

What you will submit: Your answers, directly in Gradescope.

Reflection helps engineers identify strengths, weaknesses, and opportunities for improvement.

Navigate to 20.5 Milestone 5 - Reflection (Individual) on Gradescope and answer each question individually and honestly. Your responses are graded on the depth and specificity of your reflection. The success of the project does not affect this grade. Use specific examples to support your answers whenever possible.

  1. Process strength. Identify one strategy, behavior, or decision from your team’s design process that worked well. Describe when it helped your team and why it worked.

  2. Process limitation. Identify one specific inefficiency, mistake, or challenge in how your team worked (not only “time management”). What did it cost you, and what was its root cause?

  3. The design process. Identify one place where the milestone structure (Scope the Problem -> Understand the System and Generate Ideas -> Design, Test and Iterate -> Develop and Optimize the Solution -> Deliver, Present and Reflect) changed what your team built. Then identify one place where your team worked against the process or where it felt like overhead.

  4. Evidence over intuition. Describe one belief you or your team held about the system that the data (the telemetry log, or your own test runs) showed was wrong.

  5. AI use. Reflect on how you used AI in this project: where it helped, where it misled you or wasted time, and how you verified what it told you. If you did not use it, explain that choice.

  6. Plan ahead. Name two concrete behaviors you will carry into your next engineering team: one to keep doing, one to do differently.

20.5.1. Submission#

  • Complete this assignment (20.5 Milestone 5 - Reflection (Individual)) directly in Gradescope before the deadline on the Course Schedule.

  • Also complete your final CATME peer evaluation when the window opens. See the CATME instructions from the Teaming module.

Learning Objectives

PA01:

Identify Strengths in Process - Identify effective strategies, behaviors, or decisions used during the problem-solving or design process.

PA02:

Identify Limitations in Process - Identify limitations, challenges, or inefficiencies in the problem-solving or design approach.

PA03:

Plan for Process Improvement - Identify concrete behaviors or strategies to improve future problem-solving or design efforts.

AI05:

Communicate clearly and effectively about AI usage and the choices surrounding it in a given field.

AI06:

Recognize the overarching ethical principles, trade-offs, and consequences that arise in AI-aided decision-making.

EC02:

Recognize Limits, Trade-offs, and Confidence - Recognize limitations, trade-offs, and uncertainty in engineering work and communicate appropriate levels of confidence in conclusions.

EB03:

Data-Supported Justification - Justify decisions or comparisons using explicit reference to data.