\[ \begin{align}\begin{aligned}\newcommand\blank{~\underline{\hspace{1.2cm}}~}\\% Bold symbols (vectors) \newcommand\bs[1]{\mathbf{#1}}\\% Differential \newcommand\dd[2][]{\mathrm{d}^{#1}{#2}} % use as \dd, \dd{x}, or \dd[2]{x}\\% Poor man's siunitx \newcommand\unit[1]{\mathrm{#1}} \newcommand\num[1]{#1} \newcommand\qty[2]{#1~\unit{#2}}\\\newcommand\per{/} \newcommand\squared{{}^2} \newcommand\cubed{{}^3} % % Scale \newcommand\milli{\unit{m}} \newcommand\centi{\unit{c}} \newcommand\kilo{\unit{k}} \newcommand\mega{\unit{M}} % % Percent \newcommand\percent{\unit{{\kern-4mu}\%}} % % Angle \newcommand\radian{\unit{rad}} \newcommand\degree{\unit{{\kern-4mu}^\circ}} % % Time \newcommand\second{\unit{s}} \newcommand\s{\second} \newcommand\minute{\unit{min}} \newcommand\hour{\unit{h}} % % Distance \newcommand\meter{\unit{m}} \newcommand\m{\meter} \newcommand\inch{\unit{in}} \newcommand\foot{\unit{ft}} % % Force \newcommand\newton{\unit{N}} \newcommand\kip{\unit{kip}} % kilopound in "freedom" units - edit made by Sri % % Mass \newcommand\gram{\unit{g}} \newcommand\g{\gram} \newcommand\kilogram{\unit{kg}} \newcommand\kg{\kilogram} \newcommand\grain{\unit{grain}} \newcommand\ounce{\unit{oz}} % % Temperature \newcommand\kelvin{\unit{K}} \newcommand\K{\kelvin} \newcommand\celsius{\unit{{}^\circ C}} \newcommand\C{\celsius} \newcommand\fahrenheit{\unit{{}^\circ F}} \newcommand\F{\fahrenheit} % % Area \newcommand\sqft{\unit{sq\,\foot}} % square foot % % Volume \newcommand\liter{\unit{L}} \newcommand\gallon{\unit{gal}} % % Frequency \newcommand\hertz{\unit{Hz}} \newcommand\rpm{\unit{rpm}} % % Voltage \newcommand\volt{\unit{V}} \newcommand\V{\volt} \newcommand\millivolt{\milli\volt} \newcommand\mV{\milli\volt} \newcommand\kilovolt{\kilo\volt} \newcommand\kV{\kilo\volt} % % Current \newcommand\ampere{\unit{A}} \newcommand\A{\ampere} \newcommand\milliampereA{\milli\ampere} \newcommand\mA{\milli\ampere} \newcommand\kiloampereA{\kilo\ampere} \newcommand\kA{\kilo\ampere} % % Resistance \newcommand\ohm{\Omega} \newcommand\milliohm{\milli\ohm} \newcommand\kiloohm{\kilo\ohm} % correct SI spelling \newcommand\kilohm{\kilo\ohm} % "American" spelling used in siunitx \newcommand\megaohm{\mega\ohm} % correct SI spelling \newcommand\megohm{\mega\ohm} % "American" spelling used in siunitx % % Capacitance \newcommand\farad{\unit{F}} \newcommand\F{\farad} \newcommand\microfarad{\micro\farad} \newcommand\muF{\micro\farad} % % Inductance \newcommand\henry{\unit{H}} \newcommand\H{\henry} \newcommand\millihenry{\milli\henry} \newcommand\mH{\milli\henry} % % Power \newcommand\watt{\unit{W}} \newcommand\W{\watt} \newcommand\milliwatt{\milli\watt} \newcommand\mW{\milli\watt} \newcommand\kilowatt{\kilo\watt} \newcommand\kW{\kilo\watt} % % Energy \newcommand\joule{\unit{J}} \newcommand\J{\joule} % % Composite units % % Torque \newcommand\ozin{\unit{\ounce}\,\unit{in}} \newcommand\newtonmeter{\unit{\newton\,\meter}} % % Pressure \newcommand\psf{\unit{psf}} % pounds per square foot \newcommand\pcf{\unit{pcf}} % pounds per cubic foot \newcommand\pascal{\unit{Pa}} \newcommand\Pa{\pascal} \newcommand\ksi{\unit{ksi}} % kilopound per square inch % NOTE: do NOT define \bar -- it is the built-in LaTeX accent used by \bar{x}, % \bar{y} (sample means). Redefining it made those render as the word "bar". \newcommand\barunit{\unit{bar}} \end{aligned}\end{align} \]

Nov 16, 2026 | 787 words | 8 min read

10.3.1. PY: Looping Structures#

Industrial engineers design efficient workflows for systems such as manufacturing lines and robotic processes.

In this assignment, you will first create a flowchart that models how a robot responds to different conditions in a workflow. You will then translate this flowchart into a Python program that executes the same process.

Think of your flowchart as a visual representation of an algorithm, and your code as the step-by-step decision-making system that a robot would follow in a real-world environment.

Required Files#

  1. Download the Python template ENGR131_Python_Template.py and save as 10_3_1_username.py.

  2. Create and save your program flowchart as a PDF or a PNG: 10_3_1_flowchart_username.pdf or 10_3_1_flowchart_username.png.

  3. Download the report template, complete it, and save it as 10_3_1_report_username.pdf.

Reminder

Review and reference the Python Style Guide to create a professionally formatted code file. For example, remember to provide detailed comments throughout your code so anyone can read them and understand what your program does!

Task #1: Robot Workflow Optimization#

Flowchart#

Create a flowchart that represents your robot’s decision-making process. Use the description below to guide your design.

We recommend using diagrams.net to create the flowchart.

Process Description:

A robot moves through a sequence of items on a conveyor belt. Each item may require a different action.

First, The robot receives an input from the user (“user_input”) in the form of a list separated by commas with no spaces. The list is then converted to an array called “items.” Each item in the list may be one of the following: “normal,” “fragile,” “heavy,” “error.”

The robot will loop through the list one item at a time and decide what action to take based on the type of item.

Robot Actions

Your flowchart must display how the robot responds to each type of item:

  • “normal” -> “Moving item to standard bin”

  • “fragile” -> “Handling fragile item with care”

  • “heavy” -> “Activating lift assist for heavy item”

  • “error” -> “ALERT: Item error detected - robot needs help!”

  • Any other value -> “Sending item to inspection”

Additionally, if the list contains at least 3 “error” items, then the robot should stop looking at items on the conveyor belt and display: “ALERT: Too many errors - sending robot to inspection”.

Requirements

Your flowchart should:

  • Clearly show a for loop that processes each item in the list

  • Include a conditional structure for item types

  • Display the robot action/output for each possible condition

Python Program#

Write a Python program that executes the algorithm displayed in your flowchart. Remember to prompt the user for a list of items (user_input) separated by commas (no spaces). Then convert the user input into an array of strings called items.

Use the sample inputs and outputs below to test your program.

Sample Output#

Use the values in Table 10.5 below to test your program.

Table 10.5 Test Cases#

Case

List of Items

1

normal,fragile,heavy,error,normal

2

heavy,fragile,error,error,heavy,normal,fragile,normal

3

error,normal,error,error,fragile,normal

Ensure your program’s output matches the provided samples exactly. This includes all characters, white space, and punctuation. In the samples, user input is highlighted like this for clarity, but your program should not highlight user input in this way.

Case 1 Sample Output

$ python3 10_3_1_username.pyEnter items separated by commas (no spaces): normal,fragile,heavy,error,normalMoving item to standard binHandling fragile item with careActivating lift assist for heavy itemALERT: Item error detected - robot needs help!Moving item to standard bin

Case 2 Sample Output

$ python3 10_3_1_username.pyEnter items separated by commas (no spaces): heavy,fragile,error,error,heavy,normal,fragile,normalActivating lift assist for heavy itemHandling fragile item with careALERT: Item error detected - robot needs help!ALERT: Item error detected - robot needs help!Activating lift assist for heavy itemMoving item to standard binHandling fragile item with careMoving item to standard bin

Case 3 Sample Output

$ python3 10_3_1_username.pyEnter items separated by commas (no spaces): error,normal,error,error,fragile,normalALERT: Item error detected - robot needs help!Moving item to standard binALERT: Item error detected - robot needs help!ALERT: Item error detected - robot needs help!ALERT: Too many errors - sending robot to inspection

Task #2: Analysis Questions#

Complete the analysis questions in the report template downloaded from the Required Files section. Use specific examples from your program to support your responses and use clear, professional language.

Save the completed report using the file name specified in the Required Files section.

Gradescope Submission#

  1. Save Deliverables: Ensure all required assignment files are saved and named exactly as specified in the assignment instructions. If a template file name contains the word template, replace only that word with your Purdue username. When a task lists more than one deliverable, such as a workbook and a report, submit each deliverable to its own matching Gradescope assignment instead of combining them into one upload.

  2. Navigate to Gradescope: Log in to Gradescope. From your Dashboard, open the assignment.

  3. Upload your work: Select the Upload submission method. Drag and drop all required files (or a compressed .zip folder) into Gradescope, and select Upload.

  4. Confirm Submission: When your upload is successful, you will see a confirmation message on your screen and receive an automated email receipt.

  5. Add Team Members (if applicable): If this is a team assignment, add all team members to the submission. Each teammate should confirm they can see the submission in their own Gradescope account. For help, visit Gradescope’s documentation on adding team members.

  6. Review Autograder Results: Wait a few minutes for the autograder to evaluate the relevant files. Scroll down to view any failed test cases. If you need assistance interpreting the output or errors, ask your teaching team.

  7. Resubmit if Necessary: You can edit your files and select Resubmit as many times as you need before the assignment deadline. Only your final, active submission is graded. (Note: If you need to resubmit, you must upload all required files for the assignment again).

For a detailed walkthrough, review the official Gradescope Submission Guide.