PCA: Plotting and Statistics

\[ \begin{align}\begin{aligned}\newcommand\blank{~\underline{\hspace{1.2cm}}~}\\% Bold symbols (vectors) \newcommand\bs[1]{\mathbf{#1}}\\% Differential \newcommand\dd[2][]{\mathrm{d}^{#1}{#2}} % use as \dd, \dd{x}, or \dd[2]{x}\\% Poor man's siunitx \newcommand\unit[1]{\mathrm{#1}} \newcommand\num[1]{#1} \newcommand\qty[2]{#1~\unit{#2}}\\\newcommand\per{/} \newcommand\squared{{}^2} \newcommand\cubed{{}^3} % % Scale \newcommand\milli{\unit{m}} \newcommand\centi{\unit{c}} \newcommand\kilo{\unit{k}} \newcommand\mega{\unit{M}} % % Percent \newcommand\percent{\unit{{\kern-4mu}\%}} % % Angle \newcommand\radian{\unit{rad}} \newcommand\degree{\unit{{\kern-4mu}^\circ}} % % Time \newcommand\second{\unit{s}} \newcommand\s{\second} \newcommand\minute{\unit{min}} \newcommand\hour{\unit{h}} % % Distance \newcommand\meter{\unit{m}} \newcommand\m{\meter} \newcommand\inch{\unit{in}} \newcommand\foot{\unit{ft}} % % Force \newcommand\newton{\unit{N}} \newcommand\kip{\unit{kip}} % kilopound in "freedom" units - edit made by Sri % % Mass \newcommand\gram{\unit{g}} \newcommand\g{\gram} \newcommand\kilogram{\unit{kg}} \newcommand\kg{\kilogram} \newcommand\grain{\unit{grain}} \newcommand\ounce{\unit{oz}} % % Temperature \newcommand\kelvin{\unit{K}} \newcommand\K{\kelvin} \newcommand\celsius{\unit{{}^\circ C}} \newcommand\C{\celsius} \newcommand\fahrenheit{\unit{{}^\circ F}} \newcommand\F{\fahrenheit} % % Area \newcommand\sqft{\unit{sq\,\foot}} % square foot % % Volume \newcommand\liter{\unit{L}} \newcommand\gallon{\unit{gal}} % % Frequency \newcommand\hertz{\unit{Hz}} \newcommand\rpm{\unit{rpm}} % % Voltage \newcommand\volt{\unit{V}} \newcommand\V{\volt} \newcommand\millivolt{\milli\volt} \newcommand\mV{\milli\volt} \newcommand\kilovolt{\kilo\volt} \newcommand\kV{\kilo\volt} % % Current \newcommand\ampere{\unit{A}} \newcommand\A{\ampere} \newcommand\milliampereA{\milli\ampere} \newcommand\mA{\milli\ampere} \newcommand\kiloampereA{\kilo\ampere} \newcommand\kA{\kilo\ampere} % % Resistance \newcommand\ohm{\Omega} \newcommand\milliohm{\milli\ohm} \newcommand\kiloohm{\kilo\ohm} % correct SI spelling \newcommand\kilohm{\kilo\ohm} % "American" spelling used in siunitx \newcommand\megaohm{\mega\ohm} % correct SI spelling \newcommand\megohm{\mega\ohm} % "American" spelling used in siunitx % % Capacitance \newcommand\farad{\unit{F}} \newcommand\F{\farad} \newcommand\microfarad{\micro\farad} \newcommand\muF{\micro\farad} % % Inductance \newcommand\henry{\unit{H}} \newcommand\H{\henry} \newcommand\millihenry{\milli\henry} \newcommand\mH{\milli\henry} % % Power \newcommand\watt{\unit{W}} \newcommand\W{\watt} \newcommand\milliwatt{\milli\watt} \newcommand\mW{\milli\watt} \newcommand\kilowatt{\kilo\watt} \newcommand\kW{\kilo\watt} % % Energy \newcommand\joule{\unit{J}} \newcommand\J{\joule} % % Composite units % % Torque \newcommand\ozin{\unit{\ounce}\,\unit{in}} \newcommand\newtonmeter{\unit{\newton\,\meter}} % % Pressure \newcommand\psf{\unit{psf}} % pounds per square foot \newcommand\pcf{\unit{pcf}} % pounds per cubic foot \newcommand\pascal{\unit{Pa}} \newcommand\Pa{\pascal} \newcommand\ksi{\unit{ksi}} % kilopound per square inch % NOTE: do NOT define \bar -- it is the built-in LaTeX accent used by \bar{x}, % \bar{y} (sample means). Redefining it made those render as the word "bar". \newcommand\barunit{\unit{bar}} \end{aligned}\end{align} \]

Nov 16, 2026 | 520 words | 5 min read

11.1.3. PCA: Plotting and Statistics#

Required Files#

  1. Download the template and save as 11_1_3_username.py.

  2. Download the CSV file mild_steel_stress_strain.csv and save locally (same file name) for importing and analyzing the data.

Do not submit your stress-strain plot to Gradescope - the autograder will search your code for your plot.

Reminder

Review and reference the Python Style Guide to create a professionally formatted code file. For example, remember to provide detailed comments throughout your code so anyone can read them and understand what your program does!

Instructions#

Write a Python program that imports data from a CSV file, stores the data in a Pandas DataFrame for cleaning and analysis, and plots the data in a scatter plot with a clear plot title, axis titles, and axis labels.

  1. Load data from mild_steel_stress_strain.csv into a Pandas DataFrame called data, and then display the first 5 rows of data.

  2. Calculate and display the mean, median, standard deviation, minimum, and maximum for both the stress and strain values in data. Test your program output using the sample input/output below.

  3. Plot the x (strain) and y-values (stress) using the matplotlib library:

import matplotlib.pyplot as plt
  1. Format the plot as follows:

  • Plot title: “Mild Steel Stress-Strain Curve”

  • x-axis title: ‘Strain’ displayed as a percentage

  • y-axis title: ‘Stress’ with units of MPa, where Pa is Pascals

  • x-axis limits: 0% to 45%

  • y-axis limits: 0 to 500 MPa

  • Line and data point color: blue

  • Font size:

    • Plot title: 14

    • Axis labels: 12

    • Axes tick values: 12

  • Label Padding:

    • x-label: 10

    • y-label: 10

    • title: 15

  • Grid: on, both axes

  • Minor tick marks: on

Reference Fig. 11.10 below when creating your plot.

Stress in MPa rises steeply to 5% strain, peaks near 487 MPa at 30%, then falls.

Fig. 11.10 Stress-strain curve for mild-steel#

Use the sample inputs and outputs below to test your program.

Sample Output#

Sample Output

$ python3 11_1_3_username.py--- Mild Steel Stress-Strain Data --- strain_percent stress_MPa0 0.98 62.451 2.46 124.902 4.43 249.813 4.92 312.264 5.41 362.22Mean stress: 348.72 MPaMedian stress: 362.22 MPaStandard deviation of stress: 134.55 MPaMin stress: 62.45 MPaMax stress: 487.13 MPaMean strain: 17.60 %Median strain: 10.83 %Standard deviation of strain: 15.69 %Min strain: 0.98 %Max strain: 42.32 %

Gradescope Submission#

Attention

Before submitting your python file, comment all lines with plt.show() for autograding purposes.

  1. Save Deliverables: Ensure all required assignment files are saved and named exactly as specified in the assignment instructions. If a template file name contains the word template, replace only that word with your Purdue username. When a task lists more than one deliverable, such as a workbook and a report, submit each deliverable to its own matching Gradescope assignment instead of combining them into one upload.

  2. Navigate to Gradescope: Log in to Gradescope. From your Dashboard, open the assignment.

  3. Upload your work: Select the Upload submission method. Drag and drop all required files (or a compressed .zip folder) into Gradescope, and select Upload.

  4. Confirm Submission: When your upload is successful, you will see a confirmation message on your screen and receive an automated email receipt.

  5. Add Team Members (if applicable): If this is a team assignment, add all team members to the submission. Each teammate should confirm they can see the submission in their own Gradescope account. For help, visit Gradescope’s documentation on adding team members.

  6. Review Autograder Results: Wait a few minutes for the autograder to evaluate the relevant files. Scroll down to view any failed test cases. If you need assistance interpreting the output or errors, ask your teaching team.

  7. Resubmit if Necessary: You can edit your files and select Resubmit as many times as you need before the assignment deadline. Only your final, active submission is graded. (Note: If you need to resubmit, you must upload all required files for the assignment again).

For a detailed walkthrough, review the official Gradescope Submission Guide.