\[ \begin{align}\begin{aligned}\newcommand\blank{~\underline{\hspace{1.2cm}}~}\\% Bold symbols (vectors)
\newcommand\bs[1]{\mathbf{#1}}\\% Differential
\newcommand\dd[2][]{\mathrm{d}^{#1}{#2}} % use as \dd, \dd{x}, or \dd[2]{x}\\% Poor man's siunitx
\newcommand\unit[1]{\mathrm{#1}}
\newcommand\num[1]{#1}
\newcommand\qty[2]{#1~\unit{#2}}\\\newcommand\per{/}
\newcommand\squared{{}^2}
\newcommand\cubed{{}^3}
%
% Scale
\newcommand\milli{\unit{m}}
\newcommand\centi{\unit{c}}
\newcommand\kilo{\unit{k}}
\newcommand\mega{\unit{M}}
%
% Percent
\newcommand\percent{\unit{{\kern-4mu}\%}}
%
% Angle
\newcommand\radian{\unit{rad}}
\newcommand\degree{\unit{{\kern-4mu}^\circ}}
%
% Time
\newcommand\second{\unit{s}}
\newcommand\s{\second}
\newcommand\minute{\unit{min}}
\newcommand\hour{\unit{h}}
%
% Distance
\newcommand\meter{\unit{m}}
\newcommand\m{\meter}
\newcommand\inch{\unit{in}}
\newcommand\foot{\unit{ft}}
%
% Force
\newcommand\newton{\unit{N}}
\newcommand\kip{\unit{kip}} % kilopound in "freedom" units - edit made by Sri
%
% Mass
\newcommand\gram{\unit{g}}
\newcommand\g{\gram}
\newcommand\kilogram{\unit{kg}}
\newcommand\kg{\kilogram}
\newcommand\grain{\unit{grain}}
\newcommand\ounce{\unit{oz}}
%
% Temperature
\newcommand\kelvin{\unit{K}}
\newcommand\K{\kelvin}
\newcommand\celsius{\unit{{}^\circ C}}
\newcommand\C{\celsius}
\newcommand\fahrenheit{\unit{{}^\circ F}}
\newcommand\F{\fahrenheit}
%
% Area
\newcommand\sqft{\unit{sq\,\foot}} % square foot
%
% Volume
\newcommand\liter{\unit{L}}
\newcommand\gallon{\unit{gal}}
%
% Frequency
\newcommand\hertz{\unit{Hz}}
\newcommand\rpm{\unit{rpm}}
%
% Voltage
\newcommand\volt{\unit{V}}
\newcommand\V{\volt}
\newcommand\millivolt{\milli\volt}
\newcommand\mV{\milli\volt}
\newcommand\kilovolt{\kilo\volt}
\newcommand\kV{\kilo\volt}
%
% Current
\newcommand\ampere{\unit{A}}
\newcommand\A{\ampere}
\newcommand\milliampereA{\milli\ampere}
\newcommand\mA{\milli\ampere}
\newcommand\kiloampereA{\kilo\ampere}
\newcommand\kA{\kilo\ampere}
%
% Resistance
\newcommand\ohm{\Omega}
\newcommand\milliohm{\milli\ohm}
\newcommand\kiloohm{\kilo\ohm} % correct SI spelling
\newcommand\kilohm{\kilo\ohm} % "American" spelling used in siunitx
\newcommand\megaohm{\mega\ohm} % correct SI spelling
\newcommand\megohm{\mega\ohm} % "American" spelling used in siunitx
%
% Capacitance
\newcommand\farad{\unit{F}}
\newcommand\F{\farad}
\newcommand\microfarad{\micro\farad}
\newcommand\muF{\micro\farad}
%
% Inductance
\newcommand\henry{\unit{H}}
\newcommand\H{\henry}
\newcommand\millihenry{\milli\henry}
\newcommand\mH{\milli\henry}
%
% Power
\newcommand\watt{\unit{W}}
\newcommand\W{\watt}
\newcommand\milliwatt{\milli\watt}
\newcommand\mW{\milli\watt}
\newcommand\kilowatt{\kilo\watt}
\newcommand\kW{\kilo\watt}
%
% Energy
\newcommand\joule{\unit{J}}
\newcommand\J{\joule}
%
% Composite units
%
% Torque
\newcommand\ozin{\unit{\ounce}\,\unit{in}}
\newcommand\newtonmeter{\unit{\newton\,\meter}}
%
% Pressure
\newcommand\psf{\unit{psf}} % pounds per square foot
\newcommand\pcf{\unit{pcf}} % pounds per cubic foot
\newcommand\pascal{\unit{Pa}}
\newcommand\Pa{\pascal}
\newcommand\ksi{\unit{ksi}} % kilopound per square inch
% NOTE: do NOT define \bar -- it is the built-in LaTeX accent used by \bar{x},
% \bar{y} (sample means). Redefining it made those render as the word "bar".
\newcommand\barunit{\unit{bar}}
\end{aligned}\end{align} \]
Nov 16, 2026 | 410 words | 4 min
read
8.2.1. ICA: Debugging and Auto Grader Practice
ENGR 131 students submit their Python assignments to Gradescope, where submissions
are automatically graded and students receive immediate feedback.
In this activity, you will practice submitting a Python file to Gradescope,
interpreting common auto grader errors, and correcting your submission based on the
feedback provided.
Note
This activity is not graded. When you submit the python file to Gradescope, the score will be 0/0. This is expected!
The purpose of this low stakes activity is to get extra practice with the autograder.
Required Files
Download the Python file
hello_template.py
and save it in your ENGR 131 course folder. Leave the file name the same for now.
The auto grader expects a file named
8_2_1_hello_username.py, and seeing what it
reports when a submission does not carry that name is part of this activity.
Instructions
Run the Python File
Run hello_template.py in VS Code.
Compare what your program prints to the Sample Output section below. The template
does not yet produce the correct output, and you will correct it later in this
activity.
Sample Output
Use the values in Table 8.2
below to test your program.
Ensure your program’s output matches the provided samples exactly.
This includes all characters, white space, and punctuation. In the
samples, user input is highlighted like
this for clarity, but your program should not highlight user
input in this way.
Case 1 Sample Output
$ python3 8_2_1_hello_username.pyWhat is your name? BellaHello, Bella!
Case 2 Sample Output
$ python3 8_2_1_hello_username.pyWhat is your name? EdwardHello, Edward!
Submit the File Without Renaming It
Submit hello_template.py to 8.2.1 ICA: Debugging and Auto Grader Practice on
Gradescope, under the name it was downloaded with.
Wait for the auto grader to finish, then read the feedback. It reports an incorrect
file name: it names the file pattern it looked for and lists the files your
submission actually contained. No file matched that pattern, so the auto grader could
not run your program, and the remaining tests report that they were unable to import
it.
Rename the File and Resubmit
Rename your file to 8_2_1_hello_username.py,
replacing “username” with your Purdue career account login, then submit it again.
The file name error is gone, and the auto grader is now able to run your program. It
reports the second problem: incorrect output spacing. The feedback shows your
output beside the output the auto grader expected.
Correct the Output and Resubmit
Use the auto grader feedback and the Sample Output section above to correct your
program, then resubmit.
If errors persist, make additional corrections and resubmit until every error is
resolved.